Panasonic WV-SPN531A

2. Enter the information of the certificate to be generated.
Item Description Available number of characters
[Common Name] Enter the camera address or host name. 64 characters
[Country] Enter the country name. (Omission is OK.) 2 characters (Country code)
[State] Enter the state name. (Omission is OK.) 128 characters
[Locality] Enter the locality name. (Omission is OK.) 128 characters
[Organization] Enter the organization name. (Omission is OK.) 64 characters
[Organizational
Unit]
Enter the unit name of the organization.
(Omission is OK.)
64 characters
[CRT key] Displays the key size and generation time & date
of the current key.
Note
• The available characters for [Common Name], [State], [Locality], [Organization], [Organizational
Unit] are 0-9, A-Z, a-z and the following marks.
- . _ , + / ( )
• When entering the IPv6 address for “Common Name”, put the address in brackets [ ].
Example: [2001:db8::10]
3. Click the [OK] button after entering the items.
→ The self-signed certificate will be generated.
Note
• The information of the generated self-signed certificate will be displayed on “Self-signed
Certificate” - “Information”.
Depending on the status of the self-signed certificate, the following are displayed.
Indication
Description
Not generated The self-signed certificate are not generated.
Invalid (Reason: CA Certificate installed) The self-signed certificate has already been
generated, and the certificate issued by CA has
been installed.
• In this case, the server certificate is validated.
Common name of the self-signed
certificate
The self-signed certificate has already been
generated and validated.
Operating Instructions 67
10 Configure the basic settings of the camera [Basic]