11.8 Configure the settings relating to the privacy
zone (“Privacy zone” setup menu)
Click the [Setup>>] button of “Privacy zone” on the [Image quality] tab of the “Image/Audio” page.
(®page 86)
When there is a zone that you do not want to display, set the zone as a privacy zone not to be displayed. Up
to 8 privacy zones can be set.
[Area]
The privacy zone will be set when an area is designated by dragging the mouse. Each zone can be overlapped.
The zones are numbered sequentially from area 1.
Note
• Set the privacy zone larger than the size of an object to be hidden.
[Status]
Select “On” or “Off” to determine whether or not to display the privacy zone.
• On: The privacy zone will be displayed.
• Off: The privacy zone will not be displayed.
• Default: Off
[Delete] button
Click the [Delete] button corresponding to the zone to be deleted.
[Display type]
• Gray: Displays in gray.
• Mosaic: Displays in mosaic.
• Default: Gray.
Operating Instructions 103
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
