IMPORTANT
• When “Mosaic” is selected for [Display type], image behind the set area can be seen through.
Therefore, the object and person behind the area can be recognized to some extent.
Always check the result image according to factors such as the setting conditions or the subject.
Note
• When “2 mega pixel [16:9](60fps mode)” is selected for [Image capture mode], “Mosaic” cannot be
selected.
[Close] button
Click this button to close the “Privacy zone” setup menu.
IMPORTANT
• After configuring the privacy zone, the privacy zone may move out of alignment when the JPEG/H.264
“Image capture mode” setting is changed. Make sure to check the privacy zone after changing the
“Image capture mode” setting.
• When “2 mega pixel [16:9](60fps mode)” is selected for the JPEG/H.264 “Image capture mode” setting,
a maximum of 2 privacy zones can be set.
104 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
