16.3 How to configure HTTPS settings
The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access
to cameras on this page.
The HTTPS settings will be configured in the following procedure.
Generation of the CRT key (SSL encryption key)
Con figuration of the connection protocol
Access to the cameras using the HTTPS protocol
Application for the approval by CA
(Certi ficate Authority) - Issue of the server certifi cate
Generation of CSR (Certi ficate Signing Request)
Installation of the server certi ficate
Generation of the self-signed certi ficate
When using the server certi ficateWhen using the self-signed certifi cate
Generation of the CRT key (SSL encryption key) (®page 165)
Generation of the self-signed certificate (®page 166)
Generation of CSR (Certificate Signing Request) (®page 168)
Installation of the server certificate (®page 169)
Configuration of the connection protocol (®page 170)
164 Operating Instructions
16 Configuring the network settings [Network]
To Next Page
Loading...
