Panasonic WV-SPW531AL

10.5.4 Installation of the certificate issued by CA
IMPORTANT
• If the CSR file is not generated, it is impossible to install the certificate (security certificate) issued by
CA.
• For the installation, the certificate issued by CA is required.
1. Click the [Browse...] button of “CA Certificate - Certificate install”.
→ The [Open] dialog box will be displayed.
2. Select the certification file and click the [Open] button. Then, click the [Execute] button.
→ The certification will be installed.
Note
• The host name registered in the installed certificate will be displayed on “CA Certificate -
Information”. Depending on the status of the certificate, the following are displayed.
Indication
Description
Invalid The server certification is not installed.
[Host name of the certificate] The certificate has already been installed and
validated.
Expired The certification has already expired.
• When the [Confirm] button is clicked, the registered information of the installed certificate will be
displayed in the “CA Certificate - Confirm” dialog box. (Only “Organizational Unit” will be displayed
with an asterisk (*).)
• When the [Delete] button is clicked, the installed server certificate will be deleted.
• When “On” is selected for “Additional info for detecting alteration”, it is impossible to delete the
certificate issued by CA.
• To change (or update) the certificate issued by CA, perform step 1 and 2.
IMPORTANT
• Before deleting the valid certificate (security certificate), confirm that there is a backup file on the PC
or another media. The backup file will be required when installing the certificate again.
• The expiration date of the certificate issued by CA can be checked by double-clicking the server
certification file issued by CA.
70 Operating Instructions
10 Configure the basic settings of the camera [Basic]