– When “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel [16:9](60fps mode)” is selected for “Image
capture mode”:
1/60 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000 Fix, 1/2000 Fix, 1/4000 Fix, 1/10000 Fix
– When a setting other than “2 mega pixel [16:9](60fps mode)” or “1.3 mega pixel [16:9](60fps mode)”
is selected for “Image capture mode”:
1/30 Fix, 3/100 Fix, 3/120 Fix, 2/100 Fix, 2/120 Fix, 1/100 Fix, 1/120 Fix, 1/250 Fix, 1/500 Fix, 1/1000
Fix, 1/2000 Fix, 1/4000 Fix, 1/10000 Fix
• Default: Outdoor scene
Note
• When a faster shutter speed is selected (up to 1/10000), it is possible to capture a fast moving object
with less blur.
• When a faster shutter speed is selected, the sensitivity will become lower.
• When “On(High)” or “On(Normal)” is selected for “Super Dynamic(SD)”, “Fix shutter” is not available.
To configure “Fix shutter”, set “Super Dynamic(SD)” to “Off”.
[AGC]
Select a method of gain adjustment from the following.
• On(High)/ On(Mid)/ On(Low): When the luminance of the subject becomes darker, gain will be
automatically increased and screen will become brighter. “High”, “Mid” and “Low” are indications of gain
level.
• Off: Images will be captured with the fixed gain level.
• Default: On(High)
[Maximum shutter]
The maximum shutter time adjusts the storage time of the sensor. The following are available for the recording
duration.
Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.2/120s, Max.1/100s, Max.2/100s, Max.1/60s, Max.
1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
• Default: Max.1/30s
IMPORTANT
• When a value with an interval longer than “Max.1/30s” (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.
10/30s/ Max.16/30s) is selected for “Maximum shutter”, the frame rate may become lower. Noise or
white dots (blemishes) may sometimes appear.
Note
•
:
“Max.1/60s” is available only when “2 mega pixel [16:9](60fps mode)” is selected for “Image capture
mode”.
:
“Max.1/60s” is available only when “1.3 mega pixel [16:9](60fps mode)” is selected for “Image capture
mode”.
• When “Max.16/30s” is selected, for example, sensitivity will automatically be increased up to x16.
• When “Fix shutter” is selected for “Light control mode”, this setting is unavailable.
• When “Off” is selected for “AGC”, values with an interval longer than “Max. 1/30s” (Max.2/30s/ Max.
4/30s/ Max.6/30s/ Max.10/30s/ Max.16/30s) will become unavailable.
:
When “2 mega pixel [16:9](60fps mode)” is selected for “Image capture mode”, “Max. 1/30s” will also
become unavailable.
:
When “1.3 mega pixel [16:9](60fps mode)” is selected for “Image capture mode”, “Max. 1/30s” will also
become unavailable.
Operating Instructions 101
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
