13.7.2 Configure the settings relating to HTTP alarm notification
HTTP alarm notification
[Address 1] - [Address 5]
Enter the destination IP address or host name of the HTTP alarm notification. Up to 5 destination server
addresses can be registered.
• Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
• Default: http://
Example of entry: “http://IP address of the HTTP server + : (colon) + port number” or “http://Host name: (colon)
+ port number”
[Alarm] checkbox
When the checkbox is checked, the HTTP alarm notification will be provided upon an alarm occurrence.
[Delete] button
When this button is clicked, all configured information, including the address, user name, password, and
notification data, will be deleted.
[User name]
Enter the user name (login name) to access the HTTP server.
• Available number of characters: 0 - 63 characters
• Unavailable characters: " & : ; \
[Password]
Enter the password to access the HTTP server.
• Available number of characters: 0 - 63 characters
• Unavailable characters: " &
Operating Instructions 143
13 Configure the alarm settings [Alarm]
To Next Page
Loading...
