1. Click the [Execute] button of “CRT key generate”.
→ The “CRT key generate” dialog box will be displayed.
2. Click the [Execute] button.
→ The generation of CRT key will be started. When the generation is finished, the key size and generation
time & date of the generated key will be displayed on “Current CRT key”.
Note
• To change (or update) the generated CRT key, perform step 1 to 2. The CRT key, self-signed certificate
and certificate issued by CA are valid in a set. When the CRT key is changed, it is necessary to
re-generate the self-signed certificate or re-apply for the certificate issued by CA.
• When the CRT key is updated, the log of the previous CRT key is saved. When the [History] button of
“Current CRT key” on the “CRT key generate” dialog box is clicked, the “Previous CRT key” dialog box
will be displayed, and it is possible to check the key size and generation time & date of the previous
key. When the [Apply] button is clicked on the “Previous CRT key” dialog box, it is possible to replace
the current CRT key with the previous one.
10.5.2 Generation of the self-signed certificate (security
certificate)
IMPORTANT
• If the CRT key is not generated, it is impossible to generate the self-signed certificate.
Operating Instructions 65
10 Configure the basic settings of the camera [Basic]
To Next Page
Loading...
