• When the address or host name of the camera is changed, the security alert window will be displayed
each time the camera is accessed even if the security certificate is installed. Install the security
certificate again.
• When the camera access is open to the Internet, enter the address name or host name to access via
the Internet for “Common Name”. In this case, the security alert window will be displayed each time
the camera is locally accessed, even if the security certificate is installed.
• When the security certificate is properly installed, a key icon is displayed in the address box of the web
browser that has accessed the camera.
• When using Internet Explorer 10 or Internet Explorer 11, note that some of the displayed windows may
differ from the following descriptions.
1. Access the camera using the HTTPS protocol.
2. When the security alert window is displayed, click “Continue to this website (not recommended).”
→ The “Live” page will be displayed. If an authentication window is displayed, enter the user name and
password.
Note
• If this window is displayed when accessing a device other than the camera or a website, a security
problem may have occurred. In this case, check the system status.
Operating Instructions 179
16 Configuring the network settings [Network]
To Next Page
Loading...
