Panasonic WV-SPW631L

To Next Page

To Previous Page

8. Click “Next”.

9. Click “Finish”.

184 Operating Instructions

16 Configuring the network settings [Network]

Main Page

Default Chapter3
- Viewer Software3
- Table of Contents4
1 Monitor Images on a PC7
- Monitor Images from a Single Camera7
- About the "Live" Page9
- Monitor Cropping Images13
- Monitor Images from Multiple Cameras16
2 Monitor Images on a Cellular Phone/Mobile Terminal17
- Monitor Images on a Cellular Phone17
- Monitor Images on a Mobile Terminal19
3 Record Images on the SD Memory Card Manually24
4 Action at an Alarm Occurrence26
- Alarm Type26
5 Transmit Images Onto an FTP Server28
- Transmit an Alarm Image at an Alarm Occurrence (Alarm Image Transmission)28
- Transmit Images at a Designated Interval or Period (FTP Periodic Image Transmission)28
- Save Images on the SD Memory Card When Images Fail to Transmit Using the FTP Periodic Image Transmission Function29
6 Display the Log List30
7 Playback of Images on the SD Memory Card34
- Playback "JPEG(1)"/"JPEG(2)"/"JPEG(3)" Images Saved to the SD Memory Card34
- Playback "H.264(1)"/"H.264(2)"/"H.264(3)"/"H.264(4)" Images Saved to the SD Memory Card37
8 About the Network Security40
- Equipped Security Functions40
9 Display the Setup Menu from a PC41
- How to Display the Setup Menu41
- How to Operate the Setup Menu43
- About the Setup Menu Window45
10 Configure the Basic Settings of the Camera [Basic]47
- Configure the Basic Settings [Basic]47
- Time Zone48
- Configure the Internet Settings [Internet]51
- Configure the Settings Relating to the SD Memory Card [SD Memory Card]53
  - Audio Recording56
  - File Name59
- Configure the Settings Relating to Alteration Detection [Alteration Detection]62
- How to Configure Alteration Detection Settings64
- Generation of the CRT Key (Encryption Key)64
- Generation of the Self-Signed Certificate (Security Certificate)65
- Generation of CSR (Certificate Signing Request)67
- Installation of the Certificate Issued by CA69
- Configuration of Alteration Detection70
- Access Copy Images Saved on the SD Memory Card Onto the PC [SD Memory Card Images]71
- Configure the Directory of the PC that Images will be Downloaded to [Log]85
11 Configure the Settings Relating to Images and Audio [Image/Audio]87
- Configure the Settings Relating to the Image Capture Mode [JPEG/H.264]87
- Configure the Settings Relating to JPEG Images [JPEG/H.264]88
- Image Quality89
- Configure the Settings Relating to H.264 Images [JPEG/H.264]90
- Configure the Settings Relating to Image Adjust, Zoom/Focus, Privacy Zone, VIQS, and Lens Distortion Compensation [Image Quality]96
- Configure the Settings Relating to Image Quality ("Image Adjust" Setup Menu)97
- White Balance103
- Set Mask Areas105
- Adjust the Zoom and Focus109
- Auto Focus111
- Configure the Settings Relating to the Privacy Zone ("Privacy Zone" Setup Menu)113
- Configure the VIQS Setting115
- Configure the VIQS Area117
- Configure the Settings Relating to Lens Distortion Compensation119
- Configure the Settings Relating to Audio [Audio]120
12 Configure the Multi-Screen Settings [Multi-Screen]123
13 Configure the Alarm Settings [Alarm]125
- Configure the Settings Relating to the Alarm Action [Alarm]125
- Configure the Settings Relating to the Alarm Output Terminal [Alarm]127
- Change the AUX Name [Alarm]128
- Configure the Settings Relating to the Camera Action on Alarm Occurrence [Alarm]128
- Configure Settings Relating to Image Quality on Alarm Action129
- Configure Settings Relating to Alarm E-Mail Notifications130
- Configure Settings Relating to FTP Transmissions of Alarm Images131
- Configure Settings Relating to Recording to an SD Memory Card When an Alarm Occurs132
- Configure Settings Relating to Panasonic Alarm Protocol Notification When an Alarm Occurs133
- Configure Settings Relating to HTTP Alarm Notification When an Alarm Occurs134
- Configure the VMD Settings [VMD Area]134
- Set the VMD Areas [VMD Area]136
- Configure the Settings Relating to the Audio Detection [Audio Detection]138
- Configuration of the Settings Relating to Alarm Notification [Notification]140
- Configure the Settings Relating to Panasonic Alarm Protocol141
- Configure the Settings Relating to HTTP Alarm Notification143
14 Configure the Settings Related to Advanced View [Advanced View]145
- Configure the Settings Relating to Cropping [Cropping]145
15 Configure the Settings Relating to the Authentication [User Mng.]148
- Configure the Settings Relating to the User Authentication [User Auth.]148
- Configure the Settings Relating to the Host Authentication [Host Auth.]149
- Configure the Settings Relating to the Priority Stream [System]150
16 Configuring the Network Settings [Network]153
- Configure the Network Settings [Network]153
  - Network Settings154
  - Http Port155
- Configure Advanced Network Settings [Advanced]157
- Configure the Settings Related to Sending E-Mails158
- Configure the Settings Related to FTP Transmission161
- Configure the Settings Relating to the NTP Server164
- Configure the Upnp Settings166
- Configure the HTTPS Settings167
- Configure the Settings Relating to DDNS169
- Configure the Settings Relating to SNMP169
- Configure the Diffserv Settings170
- How to Configure HTTPS Settings171
- Generation of the CRT Key (SSL Encryption Key)172
- Generation of the Self-Signed Certificate (Security Certificate)173
- Generation of CSR (Certificate Signing Request)175
- Installation of the Server Certificate176
- Configuration of the Connection Protocol177
- Access the Camera Using the HTTPS Protocol178
- Install the Security Certificate178
- How to Configure the Settings Relating to DDNS185
- Configuration of the DDNS Service (Example of the "Viewnetcam.com" Service)186
- When Using the "Viewnetcam.com" Service187
- Procedure to Register Information for the "Viewnetcam.com" Service188
- Checking the Information Registered for the "Viewnetcam.com" Service189
- When Using "Dynamic DNS Update189
- When Using "Dynamic DNS Update(DHCP)190
17 Configure the Settings Relating to the Schedules [Schedule]191
- How to Set the Schedules194
- How to Delete the Set Schedule196
18 Maintenance of the Camera [Maintenance]198
- Check the System Log [System Log]198
- Upgrade the Firmware [Upgrade]198
- Check the Status [Status]200
- Reset the Settings/Reboot the Camera [Default Reset]201
- Settings Data/Backing up or Restoring Logs [Data]202
19 Using the CD-ROM204
- About the CD Launcher204
- Installing Panasonic "IP Setting Software205
- Installing the Manuals206
- Installing the Viewer Software206
- Configure the Network Settings of the Camera Using the Panasonic "IP Setting Software207
20 About the Displayed System Log210
21 Troubleshooting215
22 Directory Structure of Drive B/Drive E225

Panasonic WV-SPW631L

Table of Contents

Other manuals for Panasonic WV-SPW631L

Related product manuals