Note
• Schedule saving is available only when “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for
“Recording format”.
FTP error
The settings related to the directory name of the PC that recorded images of when FTP errors occur will be
downloaded to can be performed.
Designate the destination folder in the same manner as for “Alarm”.
IMPORTANT
• When “Name w/o time&date” is selected for “File name” of “FTP periodic image transmission”on the
[Advanced] tab on the “Network” page, FTP error log and associated images will not be saved. To save
them, select “Name w/time&date”. (®page 161)
Note
• When “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for “Recording format”, “FTP
error” is unavailable.
[Permission level of viewing logs]
User level settings for viewing and operating “Log” on the “Live” page can be configured.
1. Level 1 only: only Level 1 users can view and operate the “Log”.
2. Level 2 or higher: only Level 1 and Level 2 users can view and operate the “Log”.
3. All users: all users can view and operate the “Log”. However, only Level 1 and Level 2 users can delete
logs, and only Level 1 users can view SD memory card folders.
Default: 1. Level 1 only
86 Operating Instructions
10 Configure the basic settings of the camera [Basic]
To Next Page
Loading...
