• It is impossible to transmit/receive audio using a cellular phone.
• Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting
“9 Low” for “Image quality setting” of “JPEG” (®page 80) may sometimes solve this problem.
• Depending on the cellular phone in use or its contract plan, it may be impossible to access.
*1
IP address is the global WAN IP address of the router that can be accessed via the Internet.
*2
Only displayed for users whose access level is “1. Administrator” or “2. Camera control” when “On” is selected for “User auth.”.
(®page 156)
2.2 Monitor images on a mobile terminal
It is possible to connect to the camera using a mobile terminal and monitor images (MJPEG only) from the
camera on the screen of the mobile terminal. Images are automatically refreshed to display the latest image.
Operations such as pan/tilt/zoom can also be performed.
The compatible mobile terminals are shown as follows. (As of August, 2011)
– iPad, iPhone, iPod touch (iOS 4.2.1 or later)
– Android™ mobile terminals
Only JPEG images can be viewed from standard Android mobile terminal browsers.
For further information about compatible devices, refer to our website
(http://panasonic.net/pss/security/support/info.html).
IMPORTANT
• When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user “admin”. (®page 156)
Note
• To view the camera images from a mobile terminal, network settings needed in order to connect to the
Internet must be set in advance. (®page 166)
Operating Instructions 23
2 Monitor images on a cellular phone/mobile terminal
To Next Page
Loading...
