Panasonic WV-SW396

Installations/Connections
Caution:
•FORULLISTEDMODEL(S),ONLYCONNECT24VACCLASS2POWERSUPPLY.
Before installation, prepare the following (E model only)
When mounting this camera, wall mount bracket WV-Q122 (option) is required. When mounting the camera on a bracket
that is locally procured, the attachment pipe is required.
Refer to the installation guide of the bracket to be used for details on the installation procedures of the bracket and the
camera.
Important:
 • Whenusingthesemountbrackets,thehexagonscrews(M6)thatareaccessoryofthebracketscannotbeusedas
the mounting screws for this camera. Use the hexagon screws (M5) attached to the housing base.
 • Whenmountingthecamera,removethe4hexagonscrews(M5),thentheattachmentpipefromthehousingbase.
Wall mount bracket WV-Q122 Attachment pipe
17