Panasonic WV-SW396

Configure the network settings of the camera using the Panasonic IP setting
software
ItispossibletoperformthenetworksettingsofthecamerausingtheIPsetupsoftwareontheprovidedCD-ROM.When
usingmultiplecameras,itisnecessarytoconfigurethenetworksettingsofeachcameraindependently.
IfthePanasonicIPsettingsoftwaredoesnotwork,configurethenetworksettingsofthecameraandthePCindividuallyon
the"Network"pageofthesetupmenu.RefertotheOperatingInstructions(includedintheCD-ROM)forfurtherinforma-
tion.
Important:
 • WhenusingMicrosoftWindows7orMicrosoftWindowsVista,the"WindowsSecurityAlert"windowmaybedisplayed
whenstartingtheIPsetupsoftware.Inthiscase,disable"UserAccountControl"fromthecontrolpanel.
 • Forthesecurityenhancement,theMACaddress/IPaddressofthecameratobeconfiguredwillnotbedisplayedwhen
around20minuteshavepassedafterturningonthepowerofthecamera.(Whentheeffectiveperiodissetto"20min"
intheIPsetup)
  Howevercamerasintheinitialsetmodearestilldisplayedevenafter 20minutes.
 • PanasonicIPsettingsoftwareisinoperableinothersubnetsviathesamerouter.
 • ThiscameracannotbedisplayedorsetwithanolderversionoftheIPsetupsoftware(version2.xx).
z To startthePanasonicIPsettingsoftware,clickthe[Run]buttonnextto[IPSettingSoftware]fromtheCDlauncher
menuwindow,ordouble-clickontheshortcuticoncreatedafterinstallingthesoftwareonthePC.
 • TheLicenseAgreementwillbedisplayed.ReadtheAgreementandchoose"Iacceptthe terminthelicenseagree-
ment",andclick[OK].
x Clickthe[NetworkSettings]buttonafterselectingtheMACaddress/IP
addressofthecameratobeconfigured.
Note:
 • WhenusingaDHCPserver,theIPaddressassignedtothecameracanbedisplayedbyclickingthe[Search]buttonof
theIPsettingsoftware.
 • WhenaduplicateIPaddressisused,thecorrespondingcameranumberwillbedisplayedshaded.
 • Whenthe[AccessCamera]buttonisclicked,liveimagesoftheselectedcamerawillbedisplayed.
 • Itispossibletochangethe"Cameralist"displaybetweenIPv4addressesandIPv6addressesinaccordancewiththe
protocol in use.
 • Theinformationdisplayedcanbesortedbyclickingthetitleofeachdisplayeditem.
Configure the network settings
31