Panasonic WV-SW396

c Completeeachnetworksetupitemandclickthe[Save]button.
Note:
 • Whenselecting"DHCP"or"AutoIP",itispossibletoset"DNS"to"Auto".
 • Byuncheckingthe"Waitforcamerarestarting."checkbox,multiplecamer-
ascanbecontinuouslyconfigured.
Important:
 • Itmaytakeforaround2minutestocompletetouploadthesettingstothecameraafterclickingthe[Save]button.The
settingsmaybeinvalidatedwhentheLANcableisdisconnectedbeforecompletingtheupload.Inthiscase,perform
thesettingsagain.
 • Whenusingafirewall(includingsoftware),allowaccesstoallUDPports.
About the default user name and password
Clickthe[Setup]buttononthe"Live"page,theuserauthenticationwindowwillbedisplayed.Enterthedefaultusername
andpasswordasfollows,andlogin.
Username:admin
Password:12345
Important:
 • To enhancethesecurity,changethepasswordfortheusername"admin".Itisrecommendedtochangethispassword
periodically.
 • To enhancethesecurityofthe"Live"page,itispossibletosetauthenticationforthe"Live"pagebyselecting"On"for
"Userauth.".RefertotheOperatingInstructions(includedintheCD-ROM)forfurtherinformation.
32