Contact can be added as a speed dial to any of the free button.
To have simple access to engine start function a phone other than the main owner’s phone, create
contact in the following format: +XXXXXXXXXXX,1234,123*,297*, where:
‘1234’ - guest PIN-code.
Enable/Disable maintenance/valet mode
1. Call system’s number. Wait for answer.
2. To enable maintenance/valet mode, dial ‘Enable maintenance/valet mode’ DTMF command
551* (engine must be running, radio tag on the 2,4 GHz should be in range if immobilizer/Antihijack
mode is active).
3. Enter individual PIN-code that is located on the owner’s plastic card.
4. To disable maintenance/valet mode, dial 552* DTMF command.
Voice help
The system has voice help menu. During voice call to the system, dial 9* and listen to the
information about system control commands. To end session, hang up the phone.
Repeat the last message
To repeat any message, press * during a voice call to the system.
Arming/disarming
1. Call the system’s number. Wait for answer.
2. Dial 1* to arm or 0* to disarm.
For silent arming dial 10* or 00* for silent disarming.
3. The system will confirm: ‘Arming/Disarming’.
To end session, hang up the phone.
Enabling/disabling automatic engine start
Pandora system has function of promptly disabling automatic engine start.
1. Call the system’s number. Wait for answer.
To Next Page
Loading...
