2. Dial 987* to disable all automatic engine starts or 789* to enable all automatic engine starts.
3. The system will confirm execution.
To end session, hang up the phone.
Automatics starts can be enabled again either by dialing 789* (all previous settings will remain
intact).
Locking/unlocking the engine
You can block car’s engine using any phone. The engine will remain blocked until phone command
‘Unlock engine’ will be sent. This blocking cannot be disabled using a remote.
1. Call the system’s number and wait for answer.
2. Dial 666* to enable engine blocking or 999* to disable engine blocking (after dialing, you will
need to enter individual PIN-code that is located on the owner’s plastic card).
Request current coordinates
1. Call the system’s number. Wait for answer.
2. Dial 500*.
3. The system will confirm: ‘Current coordinate sent via text message’ and will send text message
with coordinates and a web link to a map to your phone.
To end session, hang up the phone.
Switching on interior microphone
1. Call the system’s number. Wait for answer.
2. Dial 007*.
3. The system will switch interior microphone on.
To end session, hang up the phone.
Request GSM account balance
1. Call the system’s number. Wait for answer.
2. Dial 100*.
3. The system will confirm: ‘Balance information sent via text message’ and will send text message
To Next Page
Loading...
Need help?
General
