14
PA N D O R A S M A R T P R O V 3
it out of the lock (skip this step for cars with a Start/Stop button).
3. Leave the car, close the doors.
4. Arm the system - the engine will be stopped. Now the system is ready to perform remote and
automatic engine start.
Automatic starts
The system allows configuring automatic engine start and stop conditions. Automatic starts can be
configured using the internet-service or mobile apps. The following conditions can be specified
for automatic engine starts: schedule, time period, engine temperature, voltage. The engine will be
stopped automatically after specified time or when the engine temperature reaches a specified value.
The engine can be also stopped by a user command.
!
AUTOMATIC ENGINE STARTS AND STOPS BY TEMPERATURE ARE AVAILABLE ONLY IF A TEMPERATURE SENSOR IS CONNECTED. REMOTE
AND AUTOMATIC ENGINE STARTS ARE NOT AVAILABLE IF THE HOOD IS OPEN.
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle
!
THIS MODE IS DISABLED BY DEFAULT FOR A DIGITAL PROTOCOL. MORE INFORMATION ON LOADER.PANDORAINFO.COM. IT IS
RECOMMENDED TO ACTIVATE THE “PROHIBIT DISARMING WHEN A TAG IS ABSENT” TO INCREASE SECURITY FEATURES OF THE SLAVE
MODE. IF THIS MODE IS ACTIVATED, IT WILL BE POSSIBLE TO DISARM THE SYSTEM ONLY WHEN A TAG IS IN THE COVERAGE ZONE OR
USING THE “SECRET PIN-CODE”.
To Next Page
Loading...
Need help?
General
