Pandora SMART PRO V3 - Immobilizer Radio Tag; Functions of the Button

17
U S E R M A N UA L
IMMOBILIZER RADIO TAG
A radio tag is a device used to control a vehicle/system. The tag is also used as an authorization device
for “Immobilizer/Anti-Hijack/HandsFree” modes. It works in the Bluetooth coverage zone. The radio tag
has: a control button
for arming/disarming and activating/deactivating service mode; a built-in
accelerometer allows the tag to go into energy saving mode when there is no movement; an LED indicator
SEND.
- 2.4GHz,
Bluetooth 4.2 Low Energy
- Control button
SEND - LED indicator
CR 2032 - Battery
3D
- Accelerometer
The tag should be operated
in temperatures range from-10 to +40°C,
IP40 category.
!
AVOID MOISTURE ON THE RADIO TAG. DO NOT PLACE THE RADIO TAG NEAR MAGNETS OR PRODUCTS WITH SELF-MAGNETIC FIELDS
Functions of the button
ACTION FUNCTION
- brie y (ignition is o ) Arm/disarm
- hold for 2 seconds (system is
disarmed)
Change the “Main owner’s phone number”
- hold for 3 seconds (ignition is on) Activate/deactivate Service mode
- hold for 6 seconds Pair a tag with the base unit
- hold for 10 seconds Firmware update
SEND
Radio tag ВТ-760 Radio tag ВТ-770
3D