6
PA N D O R A S M A R T P R O V 3
PIN-codes of the system
The “Secret PIN-code”
(is written on the “Owner’s personal card”
The “Service PIN-code”
(default value is 1-1-1-1)
The “Guest PIN-code”
(default value is 1-2-3-4)
The “Immobilizer PIN-code”
(is used for the Validator (pin-to-drive) function)
! IT IS RECOMMENDED THAT YOU WILL WRITE DOWN THE CHANGED OR CREATED VALUES OF ALL PIN-CODES. ELIMINATE THIRD-PARTY
ACCESS TO THIS INFORMATION
Owner’s personal card
! ERASE THE PROTECTIVE LAYER CAREFULLY. DO NOT USE ANY SHARP OBJECTS TO AVOID DAMAGING OF HIDDEN INFORMATION UNDER
THE PROTECTIVE LAYER.
The owner’s personal card contains private information under a
protective layer:
•PIN (the “Secret PIN-code”) is a 4-digit number. This code can
be used to disarm the system and to deactivate immobilizer
functions and to activate service mode. It can be also used to
enter programming mode.
•LOGIN is a 10-digit number. This information is used to add
the system to the online service and mobile applications.
•PASS contains 8 characters and can consist of digits, lower and
upper case letters). This information is used to add the system
to the online service and mobile applications.
•Phone number is a phone number of the built-in SIM-chip.
CANNOT BE CHANGED
+7-9хх-ххх-хх-хх
1070000000 / Y34aC4vJ
2-2-2-2
LOGIN / PASS
PIN Phone number
To Next Page
Loading...
Need help?
General
