37
U S E R M A N UA L
Enter the “Secret PIN-code” or the “Service PIN-code” (default value is 1-1-1-1) to put the system in
programming mode.
Pauses between presses should not exceed 1 second. Each pressing will be confirmed with an
orange LED indicator flash. The system will confirm entering the 13th level with the red flashes of the
LED and short signals of the Siren/Beeper.
• TO DEACTIVATE THE FUNCTION – The LED indicator will be green after entering the
programming level. The system will wait 10 seconds for entering the ‘Secret PIN-code’. If the PIN-code
is not entered within 10 seconds or the input is incorrect, the siren will sound one signal, the LED will
produce the series of red and green flashes and the system will return to the programming menu. Enter
the ‘Secret PIN-code’ that is written on the owner’s plastic card. The system will confirm deactivating
with two sound signals of the siren, a long red LED flash and two sound signals of the siren. Turn on the
ignition and then turn off to exit programming mode. The function will be deactivated.
• TO ACTIVATE THE FUNCTION - The LED indicator will light red and the Beeper will sound a long
beep after entering the programming level. The system will wait for action. Press the VALET button once
activate the immobilizer function. The system will confirm enabling with one short sound signal of the
Siren/Beeper and a green LED light. Turn on the ignition and then turn off to exit programming mode.
The function will be activated.
To manage Immobilizer and Anti-
Hi-Jack functions - After entering
programming mode, press the VALET
button 13 times.
To manage Immobilizer and Anti-Hi-Jack
functions - After entering programming
mode, press the VALET button 15 times.
To Next Page
