Need help?Do you have a question about the Pangolin FB4 and is the answer not in the manual?
General| Brand | Pangolin |
|---|---|
| Model | FB4 |
| Category | Controller |
| Language | English |
Explains how to supply power to the FB4 controller, including voltage and wattage requirements.
Describes connecting the FB4 to a laser projector, referencing appendix for pinouts.
Details the process of powering on the FB4 unit and its initial light indicators.
Explains initial steps for operating the FB4 via network connection and IP addressing.
Guides on downloading and installing control software like QuickShow or BEYOND.
Details the power input connector, wire insertion, and voltage/wattage requirements.
Describes the pinout and voltage levels for the Axis Output connector.
Lists pin assignments and voltage levels for the Color Output connector.
Details the pinout and voltage levels for connecting to an ILDA DB25 connector.
Explains the shutter actuator output connector and its PWM signal.
Describes the connector for X-Y scanner position feedback input and its functions.
Details the connector for the optional ILDA daughterboard and its capabilities.
Details the connector for the optional DMX daughterboard and its capabilities.
Explains the meaning of different LED indicator states for power, network, and DMX.
Explains how to make power connections between components, including grounding.
Details power connections for laser diode drivers and PCAOMs.
Explains the projector interlock feature and its importance for safety.
Discusses connections related to ILDA DB-25 signals for scanners and color modulation.
Compares TTL and analog color modulation, highlighting safety implications.
Details the shutter signal and its relation to DB-25 signals.
Discusses the physical connector types for DB-25, recommending dual connectors.
Warns about phantom ground connections and how to avoid them.
Lists other safety features and components like key-switches and interlocks.
To Next Page
