To Next PageTo Next PageWhat to do if Pangolin Media Converter software does not find the FB4?
If the Pangolin Media Converter software doesn't find the FB4, ensure the hardware is in operation mode, either BEYOND or QS. Also, verify that 'Auto IP' is enabled in the Network Setup.
How to fix no laser output when using beams on Pangolin Media Converter?
If you experience no laser output when using beams with your Pangolin Media Converter, ensure that the scan fail function is disabled.
Connects to QuickShow and BEYOND software via Ethernet for direct control.
Lists menu options like Master Settings, Geo Correction, Color Settings, Scan Guard, Network Setup, and Device Info.
Determines scan angle limits, influencing the maximum scannable region.
Adjusts Universe, Start Address, and Profile for Artnet control.
Adjusts Start Address, Termination, and Profile for DMX control.
Adjusts X/Y Scale, X/Y Position, Z Rotation, and Shear for output accuracy.
Limits maximum output range of colors, allowing adjustment of color shift and intensity.
Enables safety feature to blank beams when output meets defined settings.
Allows changing IP address and subnet mask for network connectivity.
Uses serial port to generate DMX output for external hardware like gratings.
Specifies power requirement: single +5 to +30 volts DC at 2 watts.
Details pins for Y Positive/Negative, GND, X Negative/Positive with voltage levels.
Monitors X-Y scanner position signals for safety functions.
Lists pins for Color 1-6 (Red, Green, Blue, Deep Blue, Yellow, Cyan), Shutter, and GND.
Provides PWM output for mechanical shutter actuators, recommending ScannerMAX.
Details the optional Ethercon port and its exclusivity with the onboard Ethernet port.
Connects daughterboard for DMX-Input/Through, enabling DMX control of SD card content.
Utilizes onboard serial port for DMX output, e.g., for gratings.
Connects daughterboard for ILDA-Input/Through, allowing signal modification.
Troubleshoots no laser output by checking scan fail function.
Resolves software detection issues by verifying operation mode and network setup.
General