[Artnet]
Artnet mode provides you access to the FB4’s fixture profile by DMX over ethernet.
The FB4 can be controlled by two separate fixture profiles. A 16-channel and a 39-channel
fixture profile. As soon as the laser is being controlled through DMX, Content that is stored
on the SD card of the FB4 can be played, limited by the functionality of the fixture profiles.
More information about both profiles can be found on page 20.
During this operation mode, the following menu options will be available.
[Artnet Settings] (See page 12)
[Master settings] (See page 11)
[Geo Correction] (See page 14)
[Color Settings] (See page 14)
[Scan Guard] (See page 14)
[Network Setup] (See page 15)
To Next Page
Loading...