[BEYOND/QS]
In operation mode [BEYOND/QS], Pangolin’s QuickShow and BEYOND software
platforms are able to connect to the FB4 and control these directly through an ethernet
network. For more information how to setup the FB4 through QuickShow or BEYOND, see
the corresponding software manuals on http://pangolin.com.
During this operation mode, the following menu options will be available.
[Master settings] (See page 12)
[Geo Correction] (See page 14)
[Color Settings] (See page 14)
[Scan Guard] (See page 14)
[Network Setup] (See page 15)
[FB4 Device Info] (See page 15)
To Next Page
Loading...
General