FB4 Operation Mode
The FB4 has various operation modes. These operation modes determine which functions the
FB4 will perform. Operation modes are explained below, however it’s important to know
when the FB4 stores settings and what will happen after a power failure or power cycle.
When starting up the FB4 the first time, the default [Operation Mode] is [BEYOND/QS].
Once you change the [Operation Mode] of the FB4, the FB4 will store this change after two
seconds of inactivity. The new settings will directly become the new default and will stay
active, even after a power cycle.
Settings are stored / saved on the SD card. Settings are stored when performing a “clean"
[exit menu] through the main menu or two seconds of inactivity after making a change.
To Next Page
Loading...
General