Pantech Crossover - Accounts & Sync; Privacy; SD Card & Phone Storage

92
Settings
Maintaining the staying condition
1. Tap Settings > Applications > Development.
2
. Tap Stay awake to keep Crossover awake while it is being
charged.
Allowing mock locations
1. Tap Settings > Applications > Development.
2
. Tap Allow mock locations to pretend to be in another
location for development purposes.
Allowing installation of unknown applications
1. Tap Settings > Applications.
2
. Tap Unknown sources to allow non-market applications to
be installed on Crossover.
Accounts & sync
Managing background data
1. Tap Settings > Accounts & sync.
2
. Tap Background data if you want to sync, send and receive
data any time.
Allowing background data to sync automatically
1. Tap Settings > Accounts & sync.
2
. Tap Auto-sync if you want to sync data automatically.
Adding an account
1. Tap Settings > Accounts & sync.
2
. Tap Add account.
3
. Select and tap an account type, and follow the necessary
steps for creating an account.
Privacy
Backing up data
1. Tap Settings > Privacy.
2
. Tap Back up my data if you want to back up your data.
3
. Tap Automatic restore if you want to restore backed-up
data for an application.
Resetting Crossover
1. Tap Settings > Privacy.
2
. Tap Factory data reset if you want to erase all data from the
phone.
3
. Tap Reset phone.
4
. Tap Erase everything.
SD card & phone storage
Selecting the USB mode
1. Tap Settings > SD card & phone storage.
2
. Tap USB Mode. If you turn on the USB debugging function,
tap OK to turn it off.
3
. Tap Media Transfer, Mass storage or Ask on connection,
tap OK, and follow the relevant steps.