Pantech Ease - Creating and Sending Text Messages; Creating Multimedia Messages

66 67
Easy Mode - Messaging
03
04
05
06
01
02
03
04
05
06
07
01
02
Listening to voice message
1. Press the Quick Contacts key > Voice Mail or [ ] tap Dial and hold
X
or tap Menu > Messaging > Voice Mail.
[
] Press and hold .
It will automatically be connected to voice mail.
Loading URL using Push message
1. Tap Menu > Messaging > Inbox.
2. Select the message.
3. Tap Options > Load URL.
Saving connection settings using conguration message
1. Tap Menu > Messaging > Inbox.
2. Select the message.
3. Tap Options > Install.
Creating and sending text messages
Sending a new text message
1. Tap Menu > Messaging > Create Message.
2. Tap the address eld and then scroll to the desired contact.
Tap the contact then tap the desired phone number from the pop-up
window.
3. Tap the text window to add text. Slide open the keyboard to type.
4. Tap
OK.
5. Tap Send.
6. To view sent message, tap Menu > Messaging > Sent Messages.
Note: All successfully sent messages will be saved in Sent Messages.
Finding all sent messages
1. Tap Menu > Messaging > Sent Messages.
Creating multimedia messages
You can create and send new multimedia messages. Capacity is 600Kb.
An error message will alert you once you exceed the capacity.
Adding a saved picture to the message
1. Tap Menu > Messaging > Create Message.
2. Tap the address eld and then scroll to the desired contact.
Tap the contact then tap the desired phone number from the pop-up
window.
3. Tap the text window to add text. Slide open the keyboard to type.
4. Tap
OK.
5. Tap
Insert > Picture > Add Existing.
6. Tap the desired picture to insert and tap Select.
7. To edit the text message, tap the text box.