Name: Pantum M6550NW Plus Series
Brand: Pantum
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Note:

• Some computers may be unable to auto play the CD beacase of system configuration.

Please double click "Computer" icon, find "DVD RW driver", then double click "DVD RW

driver" to run the installation procedure.

3. Read and agree to the terms contained in the End User License Agreement and the Privacy

Policy, click the “Next” button in the lower right corner of the interface to enter the driver installation

interface.

4. Click on the "More setup methods" at the bottom of driver installation interface, and enter into

manual intallation interface.

5. Please select installation language and printer model.

6. Select "Connect via USB" and click on "Install".

7. The software installs the driver automatically and the installation process may need some time.

The duration is related to your computer configuration, please wait patiently.

8. After the installation, click "Print &Test Page" button. If your printer prints the test page

successfully, it means that you have installed the driver correctly.

3.2.2.2.1.2. Installation via wired network connection (applicable to wired network

models)

1. Turn the power of printer and computer on.

2. Connect the computer to wired network.

3. Connect network cable to the network interface of printer, to make sure the printer is connected

to computer network (please refer to Section 4 for network setup).

4. Place the attached installation CD in the computer CD-ROM:

Questions and Answers:

Need help?

Do you have a question about the Pantum M6550NW Plus Series and is the answer not in the manual?

Pantum M6550NW Plus Series Specifications

General