12.1.2.Language Setting
"Language Setting" is used to select the language to be displayed on the control panel.
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press "▲" or "▼" to select "Language set" and then press "OK" to do language setting.
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press direction key "▲" or "▼" to select the "Restore set" option and press "OK".
Note: • Factory settings of network printer can be recovered via embedded Web server
(please refer to Chapter 6.2.3.5.
12.1.3.Restore Factory Settings
“Restore factory settings” is used to recover the default settings of printer. The printer
will restart itself automatically after recovering factory settings.
To Next Page
Loading...
