Pantum M7100 Series User Manual

1.6. Function of status indicator
The meanings of status displayed by the status indicator are as below:
No.
Status displayed
by the status
indicator
Status
Status Description
1
Die out
Shutdown or sleep state
2
Green indicator
normally on
Printer is ready
3
Green indicator blinks
Operative modes of Print, Copy,
Scan, Fax and others
4
Orange indicator blinks
Low toner warning
5
Red indicator
normally on
·
Toner cartridge error (uninstalled ink
cartridge, unmatching ink cartridge,
invalid toner cartridge)
·
Drum unit error (the drum units are
not installed, not compatible or come
to the end of their service lives.)
·
Paper error (a paper out, paper
jam or feed failure occurs)
·
Scan error (a scanning failure
occurs, and the ADF has an open
cover or a paper jam.)
·
Fax error or printer error such as
the front cover of the printer is open.
1.7. Function of power indicator
No.
Status displayed by
power indicator
Status Status Description
1
Die out
Shutdown status
2
Always on
Booting and ready states
3
Blink
Sleep mode
10

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets