EasyManuals Logo

Pantum M7100 Series User Manual

Pantum M7100 Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
7.2.Print Settings
Operating
system
Temporary printing
setup change
Permanent default
setup change
Windows 7
1. Click “File” menu – “Print”
“Select printer" -“Printer
properties” (the detailed steps
may differ because of multiple
operating systems).
1.
Click “Start” menu- “Control Panel”
“Devices and Printers”.
2.
Right click on the printer icon,
select “Printing preference” and
then change setup and save it.
macOS
1.
Click “File” menu – “Print”.
2.
Change setup in the window
popping out.
1.
Click “File” menu – “Print”.
2.
Change setup in the window
popping out and click to save the
preset. (Select preset every time
before printing, or print according
to default setup.)
Note• Priority of App setup is senior to printer setup.
7.3.Cancel printing
If you want to cancel the operation during printing, please press “Cancel” key on the
printer's control panel.
7.4.Printing Mode
7.4.1.Printing with the Automatic Feeder Tray
Before printing, please make sure mediums of corresponding quantity have been
installed inside the auto feed tray, and there is no printing medium in the manual fed tray.
The printer can print with auto feed tray and manual feed tray. The defaulted state is
auto selection, and if there is printing medium in the manual feed box, papers in manual
feed tray will be used with priority.
Note
For precautions on loading paper, see Chapter 2.
For the type of media to be printed with the automatic feeder tray,see Chapter
2.1.
You can set up printing parameters with the following two methods before sending printing
work (such as paper type, paper size and paper source).
64

Table of Contents

Other manuals for Pantum M7100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M7100 Series and is the answer not in the manual?

Pantum M7100 Series Specifications

General IconGeneral
FunctionalityPrint, Copy, Scan
Print TechnologyLaser
Processor Speed600 MHz
Memory256 MB
Duplex PrintingAutomatic
Scan TypeFlatbed, ADF
Fax FunctionNo
Paper Input Capacity250 sheets
Supported Operating SystemsWindows, macOS, Linux
Print Resolution1200 x 1200 dpi
First Print Out Time8.2 seconds
ConnectivityUSB 2.0
Maximum Monthly Duty Cycle60000 pages
Recommended Monthly Page Volume750 - 3, 500 pages
Scan Resolution1200 x 1200 dpi
Copy Resolution600 x 600 dpi
Media Sizes SupportedA4, A5, A6, B5, Letter, Legal
Media Types SupportedPlain, Thick, Thin, Cardstock, Label
Print Speed33 ppm (A4) / 35 ppm (Letter)
Copy Speed33 cpm (A4) / 35 cpm (Letter)
ADF Capacity50 sheets
Paper Output Capacity150 sheets

Related product manuals