Pantum M7100 Series User Manual

12.1.4.Sleep Time Setting
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press direction key “▲” or “▼” to select “Sleep time set” option, and press “OK” key
to set the corresponding sleep time.
Note: • In sleep mode, the printer can be woken up by pressing any key or sending
printing work.
• Sleep time of network printer can be set with the embedded Web server
(Please refer to Chapter 6.2.3.4).
12.1.5.Mute printing
Sleep mode can reduce the energy consumption of printer effectively, and “Sleep time
setting” can be made in the idle time before the device enters sleep mode.
Set mute mode to realize low speed printing with low noise. When mute mode is “on”,
printing will be in a low speed. This mode is “off” by default.
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press direction key “▲” or “▼” and select “Mute printing” option and press “OK” key to turn
on/off this mode.
114

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets