EasyManuals Logo

Pantum M7100 Series User Manual

Pantum M7100 Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
3.3.Add printer to Mac system
3.3.1.Add up the printer via USB
1. Connect the printer to computer with USB cable and then turn power on.
2. Enter the “System Preferences” – “Printers & Scanners” of computer.
3. Click button to select “Add Printer or Scanner”.
4. Select printer and then select the corresponding printer mode from the “Use” menu popping
out.
5. Click “Add”.
3.3.2.Add up the printer via wireline connection
1. Turn the power of printer and computer on.
2. Connect the computer to wired network.
3. Connect the network cable to the network interface of printer, and make sure the printer is
connected to the computer network (Please refer to Chapter 4 for network setup).
4. Enter the “System Preferences” – “Printers & Scanners” of computer.
5. Click button to select “Add Printer or Scanner”.
6. Select printer and then select the corresponding printer mode from the “Use” menu popping
out.
7. Click “Add”.
3.3.3. Add up the printer via wireless connection
1. Turn the power of printer and computer on.
2. Make sure the wireless network connection between computer and printer is set up.
Note: In case of basic structure mode, connect wireless network printer to the access
point (wireless router). Please refer to Chapter 5.1 for connection method.
In case of Wi-Fi Direct mode, connect wireless client to wireless network printer
directly. Please refer to Chapter 5.2 for connection methods.
45

Table of Contents

Other manuals for Pantum M7100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M7100 Series and is the answer not in the manual?

Pantum M7100 Series Specifications

General IconGeneral
FunctionalityPrint, Copy, Scan
Print TechnologyLaser
Processor Speed600 MHz
Memory256 MB
Duplex PrintingAutomatic
Scan TypeFlatbed, ADF
Fax FunctionNo
Paper Input Capacity250 sheets
Supported Operating SystemsWindows, macOS, Linux
Print Resolution1200 x 1200 dpi
First Print Out Time8.2 seconds
ConnectivityUSB 2.0
Maximum Monthly Duty Cycle60000 pages
Recommended Monthly Page Volume750 - 3, 500 pages
Scan Resolution1200 x 1200 dpi
Copy Resolution600 x 600 dpi
Media Sizes SupportedA4, A5, A6, B5, Letter, Legal
Media Types SupportedPlain, Thick, Thin, Cardstock, Label
Print Speed33 ppm (A4) / 35 ppm (Letter)
Copy Speed33 cpm (A4) / 35 cpm (Letter)
ADF Capacity50 sheets
Paper Output Capacity150 sheets

Related product manuals