EasyManuals Logo

Pantum M7100 Series User Manual

Pantum M7100 Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3)
Press direction key “▲” or “▼” to select options of “Auto off set”, press “OK” to set of
condition and off delay.
Note: Set auto off condition:
Shutdown under no-port state (default configuration): no port is connected,
Wi-Fi function deactivated,printer is under standby or sleep mode.
Shutdown under idle state: the printer is under standby or sleep mode.
If auto off condition is satisfied, printer will be off at the preset time.
After printer is off, power consumption is 0.5W or lower.
Individual countries (or regions) do not support auto off setting.
12.1.7. Auto shut-off setting
“Auto shut-off setting” to set off condition and off delay of printer.
115
12.1.6.Print a Page for Clean & Fix
"Print a Page for Clean & Fix"function can clean the toner, paper powder and other
inpurities, so as to realize better printing effect.The printer will start up Print a Page for
Clean & Fix function automatically after the printer has printed a certain number of
pages. You can also launch Print a Page for Clean & Fix function manually by setting
up the printer panel. The steps are as follows:
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3) Press “▲”or“▼”and select "Clean & Fix" option, then press "OK" to start cleaning and
fixing of the fuser unit.

Table of Contents

Other manuals for Pantum M7100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M7100 Series and is the answer not in the manual?

Pantum M7100 Series Specifications

General IconGeneral
FunctionalityPrint, Copy, Scan
Print TechnologyLaser
Processor Speed600 MHz
Memory256 MB
Duplex PrintingAutomatic
Scan TypeFlatbed, ADF
Fax FunctionNo
Paper Input Capacity250 sheets
Supported Operating SystemsWindows, macOS, Linux
Print Resolution1200 x 1200 dpi
First Print Out Time8.2 seconds
ConnectivityUSB 2.0
Maximum Monthly Duty Cycle60000 pages
Recommended Monthly Page Volume750 - 3, 500 pages
Scan Resolution1200 x 1200 dpi
Copy Resolution600 x 600 dpi
Media Sizes SupportedA4, A5, A6, B5, Letter, Legal
Media Types SupportedPlain, Thick, Thin, Cardstock, Label
Print Speed33 ppm (A4) / 35 ppm (Letter)
Copy Speed33 cpm (A4) / 35 cpm (Letter)
ADF Capacity50 sheets
Paper Output Capacity150 sheets

Related product manuals