EasyManuals Logo

Pantum M7100 Series User Manual

Pantum M7100 Series
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Change relevant setting with “copying setting menu” for better copying effect.
1.
Press "Copy" and then "Menu" on control panel to enter the "Menu Setting" interface.
2. Press "OK" to enter the "Copy Setting" interface.
3.
Press “direction key to select option to be set and press “OK key” to set option.
·
Settings on all-in-one, clone, poster, collated copy and duplex copy will be
restored to defaults after completing the copying, switching among panel keys or
rebooting the machine.
8.4.1.Image quality
8.4. Common copying setting
Note: · The image quality, intensity, resizing and paper setting can keep valid after
Select corresponding image quality mode for original document used in order to improve
copying effect. There are 4 modes in total:
Auto: default mode, applicable to text and image originals. Text + image: applicable to
originals with mixed text and image.
Note: ·
The image quality mode supports “automatic” mode only after “poster” and
collated copyare set.
8.4.2.Intensity
options are set.
Image: applicable to original image.
Text: applicable to original text.
This printer supports "Manual Adjustment" and "Auto Adjustment" in color intensity. 5 levels for
manual adjustment and 3 levels for auto adjustment by default.
Adjust deep-light copying effect by setting intensity.
74

Table of Contents

Other manuals for Pantum M7100 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pantum M7100 Series and is the answer not in the manual?

Pantum M7100 Series Specifications

General IconGeneral
FunctionalityPrint, Copy, Scan
Print TechnologyLaser
Processor Speed600 MHz
Memory256 MB
Duplex PrintingAutomatic
Scan TypeFlatbed, ADF
Fax FunctionNo
Paper Input Capacity250 sheets
Supported Operating SystemsWindows, macOS, Linux
Print Resolution1200 x 1200 dpi
First Print Out Time8.2 seconds
ConnectivityUSB 2.0
Maximum Monthly Duty Cycle60000 pages
Recommended Monthly Page Volume750 - 3, 500 pages
Scan Resolution1200 x 1200 dpi
Copy Resolution600 x 600 dpi
Media Sizes SupportedA4, A5, A6, B5, Letter, Legal
Media Types SupportedPlain, Thick, Thin, Cardstock, Label
Print Speed33 ppm (A4) / 35 ppm (Letter)
Copy Speed33 cpm (A4) / 35 cpm (Letter)
ADF Capacity50 sheets
Paper Output Capacity150 sheets

Related product manuals