Pantum M7100 Series User Manual

6.2.1.IP address setup
You need to connect your printer to network before IP address setup.
1.
In case of wired network model, connect the printer to wired network by connecting to its
network interface with network cable.
2.
In case of wireless network model, the printer can be connected to wireless network via
wireless network setup tools or Wi-Fi Protected Setup(WPS) (please refer to Chapter 5.1).
6.2.1.1.IPv4 setup
1. Turn on printer power to connect printer to network.
2. Log in the embedded Web server (please refer to Chapter 6.1 for login method).
3. Click “Settings” – “Network settings” – “Protocol Settings” – “Wired IP Configuration”.
4. Set the IPv4 address assignment mode as “Manual”.
5. Input “IPv4 Address”, “Subnet Mask” and “Gateway Address”, and then click “Apply”.
IPv4 address of the printer is divided into DHCP auto assignment and manual setting, and
the DHCP auto assignment function is on by default. You can set up the IPv4 address of
printer manually to set up fixed IPv4 address for the printer.
58

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets