Pantum M7100 Series User Manual

•
Dirty toner cartridge.
•
Damaged inner parts of toner cartridge.
• Clean or replace toner cartridge
• Clean the mirror of the laser at the
back of the printer.
Black
vertical
stripes
•
The reflective glass of the laser inside
the printer is dirty.
• The
paper path
is dirty.
• If black vertical stripes appear when
copying or scanning, the scanner or the
platen glass may be dirty.
• Scanner Light bulb has smudges.
• The scanner is damaged.
• Clean the feed path of printer.
• Clean the scanner or the platen
glass.
Black
background
(gray
background)
•
The print media that does not meet
usage specification is used. For
example, the media is damp or too
rough.
• Dirty toner cartridge
• Damaged inner parts of toner cartridge.
• The paper path is dirty.
•
The transfer voltage inside the printer
is abnormal.
• Scanning exposure.
•
If black background or gray
background appears when copying and
scanning, the platen glass may be dirty.
•
Please use the print media within
the specification range.
•
Clean or replace toner cartridge
• Clean the paper path inside the
printer.
• Please close the cover on the
manuscript, and then carry out
copying and scanning.
• Clean the platen glass.
Cyclical
traces
appear
• Dirty toner cartridge.
• Damaged inner parts of toner cartridge.
• The fuser component is damaged.
•
Clean or replace toner cartridge
•
Please contact customer services
center to replace to a new fuser
assembly.
Skewed
pages
• The printer paper isn't put properly.
• The feed channel of the printer is dirty.
•
Make sure the print paper is
placed correctly.
• Clean the paper path inside the
printer.
Wrinkled
paper
• The printer paper isn't put properly.
•
The print media does not meet the
usage specification.
• The feed channel of the printer is dirty.
• The fuser component is damaged.
•
Make sure the print paper is
placed correctly.
•
Please use print media within the
specification range.
•
Clean the paper path inside the
printer.
• Please contact customer services
center to replace to a new fuser
assembly.
141

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets