Pantum M7100 Series User Manual

Fax
sending
fault
The dialing fails to be
done
•
Please check the connection of power cable.
•
Please check the connection of telephone line.
•
The printer is poor in
transmitting files
•
Make one copy of original to check if the fax
scanner could work normally.
• Transmit with a higher resolution.
A prompt of
"Communication Failure"
appears in printing the
fax confirmation report
•
•
Change the (audio/pulse) settings. Please set in
the fax sending menu with the dialing way
supported for telephone line.
The telephone line may suffer from temporary
noise or electrostatic interference. Please send the
fax again.
Please try to set as VoIP in compatibility and then
send again. (Please see Chapter 10.3.3
for compatibility setting.)
If the problem still occurs, please check the
telephone line.
144

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets