Pantum M7100 Series User Manual

3) Align the manuscript to match the appropriate paper size.
Note:
•
Make sure there is no document in the ADF. If a document is detected in the
ADF, it will be more preferential than that on glass platen.
4)
Close the scanner cover gently.
Note:
•
Rough textured, uneven, oil stained and extremely smooth paper will make
printing effect poor.
•
Please make sure that there is no dust, fluff, etc. on the paper.
•
Paper shall be put on a flat surface and stored under a cool and dry environment.
•
To avoid influencing the definition, please don't open the scanner cover during
scanning with the platen.
If the manuscript does not match with any size marker, please align the
upper-left corner of the manuscript with the arrow.
•
Please put the paper or document on the scanner glass after the glue, ink or
correction fluid are completely dried.
•
19

Pantum M7100 Series Specifications

General

Functionality	Print, Copy, Scan
Print Technology	Laser
Processor Speed	600 MHz
Memory	256 MB
Duplex Printing	Automatic
Scan Type	Flatbed, ADF
Fax Function	No
Paper Input Capacity	250 sheets
Supported Operating Systems	Windows, macOS, Linux
Print Resolution	1200 x 1200 dpi
First Print Out Time	8.2 seconds
Connectivity	USB 2.0
Maximum Monthly Duty Cycle	60000 pages
Recommended Monthly Page Volume	750 - 3, 500 pages
Scan Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Media Sizes Supported	A4, A5, A6, B5, Letter, Legal
Media Types Supported	Plain, Thick, Thin, Cardstock, Label
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)
ADF Capacity	50 sheets
Paper Output Capacity	150 sheets