V
15.Do not use the equipment in a thunderstorm so as to avoid the risk of an electric shock. If
possible, pull out the AC power cord during a thunderstorm.
16.If you continuously print multiple pages, the surface of the tray will become very hot. Take
care not to touch this surface, and keep children away from this surface.
17.The signal wire of the device connected with the printer can not be connected to the
outdoors.
18.Please ensure timely ventilation in case of a prolonged use or printing huge amounts of
documents in a poorly ventilated room.
19.In standby status, the product will automatically enter into the power saving (sleep) mode if
it does not receive any job order for a while (such as 1 minute); and it can realize zero power
consumption only if it has not been connected with any external input power supply.
20.As the Class 1 equipment, the product must be connected to the power supply outlet with
protective grounding line when using.
21.This product should be placed according to the shipping marks on the product package
box during delivery.
22.This product is a kind of low-voltage equipment. When using this product below the
specified voltage range,please refer to the product precautions or call Pantum Aftersales
Service Centre, if the toner comes off the printed contents, or the equipment starts slowly.
23.This product is sold as a complete machine. The consumers can go to Pantum Aftersales
Service Centre to purchase parts they need. If the product sold is inconsistent with the
package list, please go to the specified Aftersales Service Centre to solve the problem.
24.
Install this product in a place with the temperature between 10℃ and 35℃ and the relative
humidity between 20% and 80%.
25. For security and other reasons the printer may switch to intermittent printing after a certain
amount of continuous printing.
26.This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
27.IC Radiation Exposure Statement:
This equipment complies with Canada and FCC radiation exposure limits set forth for
uncontrolled environments.
This equipment should be installed and operated with a minimum distance of 20cm between
the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
To Next Page
Loading...
Need help?
General
