Paradigm T560 - Treadmill Will Not Start Troubleshooting; Running Belt Slipping Troubleshooting

HS Consumer Treadmill
TROUBLESHOOTING GUIDE - Continued
Section 1
6
(2) TROUBLE SHOOTING GUIDE
Problem
Potential cause Corrections
Treadmill
will not
start
1. Not plugged in
2. Safety tether key not
inserted
3. House circuit breaker
tripped
4. Treadmill circuit breaker
tripped
5. Switch on OFF
1. Plug into grounded outlet.
2. Insert safety tether key into console.
3. Reset or replace fuse.
4. Lubricate treadmill deck and reset.
5. Turn switch to ON
Running
belt slips
1. Running belt not tight
enough
2. Drive belt not tight enough
1. Adjust running belt tension
2. Adjust drive belt tension