1640 Icon LCD Keypad 7
3.0 Arming & Disarming
Take full advantage of your Spectra system by familiarizing
yourself with all of the arming methods.
If your system is not partitioned (see Partitioning on
page 22), everything is considered as belonging to area 1.
3.1 Exit Delay
After entering a valid arming sequence, an Exit Delay Timer
will provide you with enough time to exit the protected area
before the system arms. The keypad may beep during the
Exit Delay and the icon will flash with the number of the
partition in exit delay.
3.2 Disarming & Deactivating an Alarm
To disarm an armed system or an alarm, enter your access
code. An entry point, like the front door, will be programmed
with one of two Entry Delay Timers. When an entry point is
opened, the keypad will beep until you disarm the system.
Your alarm system will not generate an alarm until this timer
elapses. To disarm alarms generated by a Delayed Fire
Zone, please refer to Fire Alarms on page 15.
How Do I Disarm an Alarm?
Enter your
[ACCESS CODE].
1640-EU02.fm Page 7 Wednesday, May 18, 2005 3:10 PM
To Next Page
Loading...
Need help?
General
