12 User Guide
entries saved in memory. This eliminates the need to
manually reprogram the bypass entries every time you arm
the system.
3.9 One-Touch Arming
One-Touch Arming allows you to arm the system without
using an access code. These features must be enabled by
your installer.
3.9.1 One-Touch Regular Arming
Press and hold the key for 3 seconds to arm all zones in
the area. You can use this feature to allow specific individuals
like service personnel (i.e. cleaners) to arm without giving
them access to any other alarm system operations. For
details on Regular Arming, refer to Regular Arming on
page 8.
3.9.2 One-Touch Stay Arming
Press and hold the key for 3 seconds to stay arm. For
details on Stay Arming, refer to Stay Arming on page 9.
How Do I Recall Bypass Entries?
1. Press the key.
2. Enter your [
ACCESS CODE].
3. Select an area.
4. Press the key.
5. Press the to exit.
1640-EU02.fm Page 12 Wednesday, May 18, 2005 3:10 PM
To Next Page
Loading...
Need help?
General
