8 User Guide
3.3 Alarm Memory Display
All zones where alarms have occurred will be stored in
memory. The system will erase the contents of the Alarm
Memory every time the system is armed.
3.4 Regular Arming
This method will arm all the zones in the selected area.
Regular Arming can also be activated using Auto-Arming
(see page 14), a Keyswitch (see page 14), or One-Touch
Arming (see page 12).
How Do I View the Alarm Menu?
1. Press the key.
2. The icon will flash and the corresponding number of
zones that were in alarm the last time the system was
armed will illuminate.
3. Press the or key to exit.
How Do I Regular Arm?
1. Close all zones in the desired area.
2. Enter your [
ACCESS CODE].
3. If required, press the key corresponding to the desired
area, [1] or [2]. For both areas, press the other key after
the confirmation beep.
1640-EU02.fm Page 8 Wednesday, May 18, 2005 3:10 PM
To Next Page
Loading...
Need help?
General
