14 User Guide
3.10 Keyswitch Arming
A keyswitch can be used to arm and disarm the system. A
keyswitch is programmed to Stay Arm (see page 9) or
Regular Arm (see page 8). A keyswitch can function as a
Maintained or Momentary keyswitch.
To arm the system using a Maintained Keyswitch, set the
keyswitch to the ON position. To disarm the system set the
keyswitch to the OFF position.
To arm the system using a Momentary Keyswitch, set the
keyswitch to the ON position then turn it back to the OFF
position. Repeating this sequence will disarm the system.
3.11 Timed Auto-Arming
You can program the time at which your alarm system will
automatically arm itself everyday.
How do I Program the Auto-Arm Timer?
1. Press the key.
2. Enter your [
MASTER CODE].
3. Enter [101] for area 1 or [102] for area 2.
4. Enter the desired [
TIME]. Note: Your installer will have set
the time as either International (24hr) or U.S. (12hr)
format.
5. Select [1] for a.m. or [2] for p.m. time format. Refer
Program Time on page 21 for details concerning time
formats.
1640-EU02.fm Page 14 Wednesday, May 18, 2005 3:10 PM
To Next Page
Loading...
Need help?
General
