1640 Icon LCD Keypad 21
4.4 Program Time
4.5 Quick Function Keys
Upon request of your installer or monitoring station you may
have to perform one of the following.
4.5.1 Test Report
Press the key, enter your [
MASTER CODE] and press the
key.This will send a test report code to the monitoring
station.
4.5.2 Call PC
Press the key, enter your [
MASTER CODE] and press the
key.This will initiate a call to the monitoring station that is
using the WinLoad software.
How do I Program the Time?
1. Press the key.
2. Enter [
MASTER CODE].
3. Enter [100].
4. Enter the desired
[TIME]. Note: Your installer will have
set the time as either International (24hr) or U.S. (12hr)
format.
5. If the format is U.S., select “1” for A.M. or “2” for P.M.
6. Press the key to exit.
1640-EU02.fm Page 21 Wednesday, May 18, 2005 3:10 PM
To Next Page
Loading...
Need help?
General
