DGP2-640 Icon LCD Keypad 9
4.5 Beep on Exit Delay
Section [009]: Option [4]
With option [4] enabled, the keypad will beep once every second
during the Exit Delay Timer and during the final 10 seconds, it will
beep more rapidly to provide a final warning before the partition is
armed.
Option [4] OFF = Exit Delay beep disabled
Option [4] ON = Exit Delay beep enabled (default)
4.6 Chime on Zone Closure
Section [009]: Option [5]
During the Chime Zone time period that the user sets, the keypad
can emit an intermittent beep whenever a zone with the Chime
feature enabled closes (see the DGP2-640 User Guide for details on
Chime Zones). If the user does not set the Chime Zone time period
and this option is enabled, the Chime Zones will always beep upon
closure.
Option [5] OFF = Chime on Zone Closure disabled (default)
Option [5] ON = Chime on Zone Closure enabled
4.7 Time Format
Section [009]: Option [6]
The keypad comes with a time display option that can display the
date as International (24Hr) or U.S. (a.m./p.m.).
Option [6] OFF = International (default)
Option [6] ON = U.S. (a.m./p.m.)
4.8 Beep on Trouble
Section [010]: Options [1] to [4]
Potential troubles are sorted into groups. With these options enabled,
the keypad will emit an intermittent beep whenever a trouble
DGP2640_EI00.fm Page 9 Thursday, April 7, 2005 12:05 PM
To Next Page
Loading...
Need help?
General
