14 R eference & Installation Manual
4.10 Chime on Zone Closure
SECTION [004]: O PT ION [4]
During the Chime Zone Time Period that the user sets, the
keypad can emit an intermittent beep whenever a zone with the
Chime feature enabled closes (see D igiplex or DigiplexNE Us er
Manual for details on Chime Zones). If the user does not set the
Chime Zone Time Period and this option is enabled, the Chime
Zones will always beep upon closure.
4.11 Beep on Trouble
SECTION [005]: O PT IONS [1] TO [4]
Potential troubles have been sorted into groups. With these
options enabled, the keypad will emit an intermittent beep tone
whenever a trouble condition from the Trouble Groups occurs in
the system. The intermittent beep will remain ac tivated until the
user enters the Trouble Display or if the trouble is resolved. For a
list of the troubles, see the Digiplex or DigiplexNE Reference and
Installation Manual. The intermittent beep will be re-initialized
whenever the trouble condition re-occurs.
Option [4] OFF = Chime on Zone Closure disabled (default).
Option [4] ON = Chime on Zone Closure enabled.
O
ption [1] OFF = Beep disabled: System Troubles and Clock
Loss (default).
Option [1] ON = Beep enabled: System Troubles and Clock
Loss.
To Next Page
Loading...
Need help?
General
