16 Programming Guide
Communication Restore Report Codes
VDMP3 Options
* This section applies to the Plug-In Voice Dialer when using a VDMP3.
NOTE: For more VDMP3 options, see Communication Timers on page 15.
WinLoad / IP100 / PCS100 Programming
WinLoad / PCS100 Connection Settings
* Must be configured through WinLoad
Refer to the Installer Quick Menu on page 40 for alternate programming of PC phone number, panel ID, and PC password.
[881] ____/____ GSM RF jam [882] ____/____ N/A
____/____ GSM no service ____/____ IP100 no service*
____/____ GSM module supervision lost ____/____ IP100 supervision lost*
____/____ GPRS receiver fail to communicate* ____/____ IP receiver fail to communicate*
* E65 panels only
[703] Calling the VDMP3
Option OFF ON
[8]
Calling the VDMP3
N Disabled N Enabled
Section Data Description
[841] ____/____/____ (000 to 032) Maximum voice dialing attempts - VDMP3 (default 008)
[900] WinLoad Options
OFF ON
[1] Call back
N Disabled N Enabled
[2] Automatic event buffer transmission
N Disabled N Enabled
[910] ____/____/____/____ Panel ID
NOTE: For increased communication security, change
the default Panel ID and PC password.
[911] ____/____/____/____ PC password
[915] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
PC TELEPHONE NUMBER
[780] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
SMS SITE NAME
[920] ____/____/____/____/____
PORT (DEFAULT = 10000)
[921]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
ACCESS POINT NAME (APN) PART 1 (E.G. INTERNET.COM)
[922]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
ACCESS POINT NAME (APN) PART 2
[923]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
USER NAME PART 1
[924]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
USER NAME PART 2
[925]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
PASSWORD PART 1
[926]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
PASSWORD PART 2
[927]* ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
INSTALLER SOFTWARE PASSWORD (WINLOAD) (DEFAULT = ADMIN)